Yes, absolutely. The ID CM200B is rated at 220–240V~ / 50–60Hz and comes supplied with a Type G (British 3-Pin) plug, which is the standard plug type used across the UAE and wider GCC region. No adapters or rewiring are required — simply plug in and start mixing.

A barrow-type concrete mixer features a chassis and wheel configuration similar to a wheelbarrow, allowing the entire machine to be tilted and moved around a worksite with relative ease. This design also facilitates convenient discharge of the mixed concrete directly into a mould, formwork, or wheelbarrow. It is distinct from a static or drum-only mixer, offering greater on-site flexibility.

Yes. The ID CM200B is engineered for heavy-duty, professional use. With an 850W motor, a 180-litre drum, and a build quality that has passed CE machine testing, it is designed to handle the demands of construction sites, civil engineering projects, and large-scale renovation works — not just occasional DIY tasks.

The drum has a total capacity of 180 litres. In practice, a concrete mixer should not be filled to its absolute maximum to allow for effective tumbling and mixing. A typical working load is approximately 60–70% of the drum volume, which means you can expect to produce roughly 100–120 litres of mixed concrete per batch, depending on your mix ratio.

Double insulation is a safety engineering standard where all live electrical components inside the machine are enclosed within a second layer of insulating material, completely separate from the outer casing. This means that even if an internal component were to fail, there is no path for electrical current to reach the operator through the machine's body. It is a critical safety feature for power tools used in wet or outdoor environments like construction sites.

The drum rotates at 28 RPM (revolutions per minute). This speed is specifically optimised for concrete mixing — fast enough to tumble and combine cement, aggregate, and water into a uniform mix, but controlled enough to prevent segregation of the materials. The no-load motor speed is 2,800 RPM, which is stepped down through the gearing system to deliver the ideal 28 RPM at the drum.

Yes. The barrow-type chassis is specifically designed for on-site mobility. At 58 kg, the machine is substantial enough to be stable during operation but can be repositioned by one or two operators between pours. The wheel-and-handle configuration means you can move it across uneven ground typical of active construction sites without needing additional lifting equipment.

The ID CM200B addresses this directly through its double insulation design. All internal electrical components are fully isolated from the machine's outer casing, meaning there is no risk of the casing becoming live even in the event of an internal fault. For additional site safety, we always recommend using the machine in conjunction with a Residual Current Device (RCD) on your power supply circuit.

The ID CM200B is built for heavy-duty, sustained operation. Its 850W motor is powered by innovative technology and engineered to outlast demanding workloads. For best results and longest machine life, allow the drum to complete each full mixing cycle before loading the next batch, and ensure the machine is cleaned of residual concrete after each use to prevent build-up that can strain the motor and drum mechanism over time.